Configure · 2026 H2 factory pricing

Build your SD-1

Four completion levels, from a crate of parts to a finished airplane. Work through the choices and see what the factory price comes to.

SD-1 Minisport in a red and white checkered scheme flying over farmland and lakes

Without JavaScript

Every option and price below is still listed, but the running total and the other completion levels need JavaScript. The starting price of each level is onthe kits page, and we are glad to price a configuration by email.

01Completion level

Airframe Material Kit$12,027Raw and pre-cut parts for the whole airframe. The most building, the lowest price.

Airframe 51% Kit$19,001The airframe further along: structures built up, major work already done.

Airframe Quick Build Kit$26,271The fastest route to a finished airframe. Fuselage, wing and tail already built.

Complete aircraft$48,435Built by the factory, with the SE33I XP engine. Not an amateur-built path.

02Engine

The airframe kits do not include an engine. The factory sells the SE33I XP as a complete firewall-forward package: engine, equipment, mount, cowling, propeller and spinner.

Learn about the SE33I XP (opens in a new tab)

No engine package — I will source my ownNo extra cost

SE33I XP firewall-forward package+$11,67735 hp, two-cylinder four-stroke inverted engine with a composite Helix propeller.

03Landing gear

The kit is supplied with the conventional tailwheel. Both tricycle arrangements are factory options.

Conventional TailwheelIncludedSupplied as standard in the material kit. Factory designation: TD.

Tricycle Gear with Castoring Nose Wheel+$138Factory designation: TG.

Tricycle Gear with Controllable Nose Wheel+$917Factory designation: TGC.

04Canopy

Standard Sport CanopyIncludedFiberglass top.

Full Bubble Canopy+$658No shaded top.

Full Bubble Canopy with Blue Tint+$698

05XL cockpit options

These may be combined. Confirmed by the factory, 2026-09-23.

XL Headroom+$88Higher canopy top and turtle deck.

XL Legroom+$76Longer fuselage for taller pilots.

XL Cockpit Width+$2,882Wider cockpit for added comfort and shoulder room. The factory supplies this one with the fuselage finished to the "boat" stage, which is why it is priced well above the other XL options.

06Controls and brakes

Adjustable pedals+$498Standard in the TGC version.

Toe brakes+$198Reduces leg room by 50 mm (2 in).

07Equipment

Wing tip mounts for Aveo Powerburst strobes+$188

LED landing light mount, one wing leading edge+$245Light included.

Electric VDO fuel sender with 50 mm gauge+$297

Wing anchor points+$86

Four-point seat belt with central buckle+$286

Canopy lock+$38

Rescue system installation kit (Dyneema ropes)+$218

08Fuselage finishing

Fuselage components the factory supplies finished rather than as raw parts.

Finished fuselage tunnel, tailwheel version+$418For the conventional tailwheel. The tricycle versions take the other tunnel.

Finished fuselage tunnel, tricycle version+$385For either tricycle undercarriage. The conventional tailwheel takes the other tunnel.

Finished fuselage sidewalls+$438

02Engine

The airframe kits do not include an engine. The factory sells the SE33I XP as a complete firewall-forward package: engine, equipment, mount, cowling, propeller and spinner.

Learn about the SE33I XP (opens in a new tab)

No engine package — I will source my ownNo extra cost

SE33I XP firewall-forward package+$11,67735 hp, two-cylinder four-stroke inverted engine with a composite Helix propeller.

03Landing gear

The kit is supplied with the conventional tailwheel. Both tricycle arrangements are factory options.

Conventional TailwheelIncludedSupplied as standard in the Quick Build kit. Factory designation: TD.

Tricycle Gear with Castoring Nose Wheel+$305Factory designation: TG.

Tricycle Gear with Controllable Nose Wheel+$990Includes adjustable pedals. Factory designation: TGC.

04Canopy

Standard Sport CanopyIncludedFiberglass top.

Full Bubble Canopy+$658No shaded top.

05Finish

The kit arrives unpainted. The factory can prime it, or prime and paint it.

Finish it yourselfNo extra cost

Primed, ready for final paint+$1,895

Finished in white RAL 9003+$5,528

06Factory assembly work

Individual jobs the factory can complete before the kit ships.

Fuselage prepared for a rescue system+$397

Controls assembled, fuselage bottom and firewall closed, varnished+$768

Wings fitted to the fuselage with fairings+$583

Canopy assembled and fitted+$648

Glass cloth laid up in epoxy over the plywood wing skin+$298

Main undercarriage assembled with fairings+$418

Tail or nose wheel assembled+$164

Rudder assembled+$167

Customer's rescue system installed+$347

07XL cockpit options

These may be combined. Confirmed by the factory, 2026-09-23.

XL Headroom+$234Higher canopy top and turtle deck.

XL Legroom+$496Longer fuselage for taller pilots.

XL Cockpit Width+$598Wider cockpit for added comfort and shoulder room.

08Landing light

No landing light mountNo extra cost

One wing leading edge+$328Light included.

Both wing leading edges+$656Lights included.

09Controls and brakes

Adjustable pedals+$523The TGC already includes adjustable pedals.

Toe brakes+$198Reduces leg room by 50 mm (2 in).

10Equipment

Wing tip mounts for Aveo Powerburst strobes+$188

Electric VDO fuel sender with 50 mm gauge+$297

Wing anchor points+$168

Canopy lock+$39

Four-point seat belts+$286

02Landing gear

Conventional TailwheelIncludedDifferential mechanical drum brakes, no wheel pants. Factory designation: TD.

Tricycle Gear with Castoring Nose Wheel+$755Factory designation: TG.Weight +11 lb

Tricycle Gear with Controllable Nose Wheel+$1,421Includes adjustable pedals. Factory designation: TGC.Weight +13 lb

03Engine

The complete aircraft is built around the SE33I XP, so it is part of the base price rather than an extra.

Learn about the SE33I XP (opens in a new tab)

SE33I XP, 35 hpIncludedTwo-cylinder four-stroke inverted engine with a composite Helix propeller. Included in the base aircraft.

Hirth F-23 AS, 50 hp+$3,850Poly-V 1:2 reduction, three-blade carbon Sandera 1400 propeller.Weight −8.8 lb

04Rescue system

No rescue systemNo extra cost

GALAXY GRS 4/240 parachute rescue system+$3,955Weight +16 lb

05Battery

Varta Motorsport 8 Ah gelIncludedIncluded in the base aircraft.

Shorai 9 Ah ultralight+$263Weight −4.9 lb

06Instruments

The base aircraft carries ASI, altimeter, compass, VSI, skid ball, Tiny-Tach, one CHT and a carbon panel. An EFIS replaces that panel.

Basic instruments only (included)No extra cost

AvMap Ultra EFIS with backup ASI+$1,087Weight −3.3 lb

MGL Discovery Lite 7" EFIS with RDAC XF, SP-6 compass and backup ASI+$3,292Weight +1.1 lb

07COM radio

A COM antenna is built into the base aircraft.

No radioNo extra cost

TQ KRT 2, 8.33 kHz, 5 W+$1,463Weight +1.8 lb

TRIG TY91, 8.33 kHz, 6 W+$1,795Weight +2.0 lb

08Transponder

No transponderNo extra cost

TQ KTX 2, Mode S+$2,184Weight +3.1 lb

TRIG TT21, Mode S+$2,385Weight +3.3 lb

09Landing light

No landing lightNo extra cost

LED landing light, one wing leading edge+$423Weight +0.7 lb

LED landing lights, both wing leading edges+$846Weight +1.3 lb

10XL cockpit options

These may be combined. Confirmed by the factory, 2026-09-23.

XL Headroom+$313Higher canopy top and turtle deck.Weight +2.4 lb

XL Legroom+$439Longer fuselage for taller pilots.Weight +1.8 lb

XL Cockpit Width+$748Wider cockpit for added comfort and shoulder room.Weight +2.0 lb

11Controls and brakes

Adjustable pedals with differential brakes+$594The factory offers this for the TD and TG only. The TGC already has adjustable pedals.Weight +2.9 lb

Toe brakes+$282Reduces leg room by 50 mm (2 in).Weight +0.6 lb

Your configuration

Your SD-1

Configuration code

—

Request this configuration

Base factory price in USD, EXW Hodonin, Czech Republic. Packaging, international freight, import costs, taxes and U.S. delivery are additional. Options are priced separately. Factory pricing valid through December 31, 2026.

Pricing version 2026 H2 · valid through December 31, 2026

Estimated

$12,027*

Summary

Build your SD-1

01Completion level

02Engine

03Landing gear

04Canopy

05XL cockpit options

06Controls and brakes

07Equipment

08Fuselage finishing

02Engine

03Landing gear

04Canopy

05XL cockpit options

06Landing light

07Controls and brakes

08Airframe work

09Equipment

02Engine

03Landing gear

04Canopy

05Finish

06Factory assembly work

07XL cockpit options

08Landing light

09Controls and brakes

10Equipment

02Landing gear

03Engine

04Rescue system

05Battery

06Instruments

07COM radio

08Transponder

09Landing light

10XL cockpit options

11Controls and brakes

12Equipment and finish

Your SD-1